Replacing electrical wiring when needed should be on top of your priorities to avoid and prevent accidents and deaths.
People don’t give much thought about electrical wiring as long as the lights, TV, AC, refrigerator, and other appliances work fine. However, it doesn’t mean the house is safe, especially if it’s more than 40 years old. Upgrading the wires are necessary to ensure the electrical safety and make a home safer and more livable.
Safety Issues with Older Electrical Wiring
The National Fire Prevention Association states electrical failures have caused 43,700 home fires in the United States in 2011. The older is the house, the greater the risk of accidents.
Even if the wiring system dates back to the early 20th century, you can’t tell (unless you were present during the installation) whether it was up to the code. The insulation of the wires can deteriorate faster depending on the weather and environmental conditions. If you want to ensure the electoral safety of your home, hire a licensed electrician to conduct a full inspection of the entire system.
Replacing Electrical Wiring: The Right Time
Outdated or damaged electrical wiring can cause big accidents. There’s no guarantee that wires will last until the end of their expected lifespan. So, when problems occur, you’ll need to change them right away. Additionally, you should not ignore these following warning signs:
- When touching an appliance, switch, or receptacle gives a tingling sensation
- Burning smell from an outlet or appliance
- Burnt switch plates or sockets
- Flickering lights
- Frequent circuits break offs due to tripped breakers or blown fuses
- No GFICs (ground fault circuit interrupters) in the areas that have damp and wet conditions
- If the house is old (built more than 40 years ago)
Home Repairs That Matter for Electrical Safety
Contact an expert electrician immediately if your living place shows any of the warnings mentioned above. The problems that require immediate attention are:
- Frayed or damaged wires, which can be the result of heat, corrosion, bending, piercing by sharp objects. These are extremely dangerous, and the replacement job should be done by a professional.
- Circuit breakers that trip frequently. It happens because of electricity overload. In that case, you have to hire a licensed electrician to calculate the load and install new circuits that are rated for that amount of power.
- Smoke from an outlet or socket is never a good news. Damaged or cracked electrical wiring might be the culprit here. You should take professional help to identify the source of trouble.
- If turning on an extra device or appliance cause the dimming of ceiling lights, you may have to change the wiring or the circuits assigned to these fixtures.
- Broken switch plates and outlet covers can loosen the connection between the internal wiring and switches. So, replace the broken covers and check for loose connections.
It’s possible to prevent most of the electricity-related accidents that could happen in your household. Learn about the problems and do regular checkups to find out if there’s any imminent danger. Opt for a complete upgrade or you can also opt to replacing electrical wiring system if you live in an old house. It will be expensive but worth the price if you consider what are at stake if you don’t do it.